Spécifications
-
Technique
Référence(s)
351077-000
Technologie
Résistif à 5 fils (AccuTouch®)
Nombre de contacts
Touche unique
Méthodes de saisie
Doigt
Gant
Stylet passifDimensions
2.36" x 3.30" x 0.40" / 59.94 mm x 83.82 mm x 10.16 mm
Interface
EIA 232E (Serial RS-232), DCE configuration. 8 Data Bits, 1 Stop Bit, No Parity, Full Duplex
Hardware handshaking: RTS/CTS
DSR is pulled HIGH (>+3V) by the 2500S when connected and powered. DTR can be asserted by the host to interrupt the flow of dataTraitement de surface
Clair
Résolution
4096x4096, size independent, 255 levels of Z (pressure)
Conversion Time
Approximately 10.4 ms per coordinate set
Entrée d’alimentation
+4.75 to +5.25 VDC
Vitesse de transmission
9600 (default) and 19200
Reliability
MTBF greater than 300,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for ground benign environment with an ambient temperature of 25°C
Construction
Four-layer surface-mount design with internal ground plane for EMI suppression
Flammability
The printed circuit board substrate is rated 94V0. All plastic components, such as headers and connectors, are also rated 94V0.
Shock and Vibration
Three axis sine wave, 50 Hz to 2kHz, 1 G, 2 minutes/Octave with dwell on resonances
ESD
Per EN 6100-4-2 1995: Level 4. Contact discharge 8kV, air discharge 15kV.
Température de fonctionnement
0°C to 65°C
Température de stockage
-25°C to 85°C
Humidité
Operating: 10% to 90% RH, noncondensing
Storage: 10% to 90% RH, noncondensingAltitude
10,000 feet
Temps moyen entre défaillances
50 000 heures démontrées
Options de montage
All mounting holes are plated through for chassis ground connection. Refer to the drawings at the end of this document.
Connectors and Pin Definitions
The connector configuration permits the controller to be placed in-line between the touchscreen and serial I/O attachments.
Câbles du contrôleur
Contact Elo for more information.
Optional Software/Hardware Handshaking
RTS/CTS